Sodium hydroxide details
Sodium hydroxide details
Sodium hydroxide details : Sodium hydroxide (NaOH) an inorganic compound with following synonyms
Caustic soda
Lye
Sodium hydrate
NaOH widely used inorganic industrial chemical.
Sodium hydroxide’s chemical formula is NaOH
NaOH molecular weight of 39.997 g/mol
Sodium hydroxide is containing ph of ~12-14
Sodium hydroxide characteristics can be mentioned as
Raw material for various industrial products Co-product in chlorine synthesis
Strong base
Highly corrosive
Auxiliary chemical
Odorless material
Caustic soda forms
Caustic soda is available in two forms – Caustic soda lye and Caustic soda solid.
Solid form of caustic soda can be in the form of Caustic soda flakes or Caustic soda granules.
Pure form of sodium hydroxide also available as
Sodium hydroxide pellets
Sodium hydroxide granule
Sodium hydroxide solution
Caustic soda has wide variety of industrial sectors like
In pulp and paper processing industry caustic soda used at the stages like bleaching process,
in de-inking of waste paper, and in water treatment.
Next major industry like textile industry caustic soda is used to process cotton and synthetic fibers
Caustic soda is utilized more in the soap and detergent industry.
Other caustic soda uses include
In oil and gas industry – to remove pungent smells
In household cleaning products
In beverage bottles
In home soap making
Worldwide there is high demand for caustic soda and increase in caustic soda prices,
applications in daily lives this article gives the different modern caustic soda manufacturing processes.
Production method
Sodium Hydroxide solutions are produced by three different technologies
Mercury cells
Membrane cells
Diaphragm cells
Each of above processes utilizes sodium chloride (NaCl) salt as the primary raw material.
Electrolytic splitting of salt results in products like chlorine and sodium ion (Na+).
In turn Na+ will react with water in the mercury cell to form Sodium hydroxide and Hydrogen as by product.
Mercury Cell
Fig. [1] Mercury cell
In the Mercury Cell Process saturated brine voyages down a steel trough roughly 15 meters in
length and one-meter-wide between a streaming film of mercury
(the cathode) and titanium plates (the anodes). Direct current is connected between the anode and cathode.
Chlorine freed at the anodes gathers above the brine and is begun as
a hot, wet and corrosive gas.
Sodium ions are released at the surface of the streaming mercury cathode,
forming an amalgam of low concentration with the mercury,
which streams out of the cell without reacting with the water or chlorine.
The mercury cell thus has two products
(i) Hot, wet chlorine
(ii) Sodium amalgam
The soda cell or decomposer is a cylindrical steel trough loaded with graphite balls or graphite electrodes.
The sodium amalgam is passed, along with pure water, into the decomposer,
where it reacts to transform Sodium hydroxide as a controlled 50 per
cent aqueous solution and hydrogen gas,
liberating fee mercury, which is reused again to the electrolytic cell.
The graphite provides a surface that expedites this reaction.
The following two types of reactions called brine cell and the soda
cell respectively.
Brine Cell
2Cl = Cl2 + e
Na + e = Na
Na + Hg = Na/Hg
Soda Cell
2 Na/Hg + 2 H2O = 2NaOH + H2 + 2Hg
Diaphragm Cell
This method produces 71 per cent of Sodium hydroxide.
Diaphragm Cell process utilizes asbestos or alternate substitutes to asbestos,
to separate the co-products Sodium Hydroxide (Caustic Soda) and Chlorine.
The production of 50 per cent NaOH occurs primarily outside of the electrolytic cell.
The diaphragm cell produces a very weak ‘cell liquor,’ that contains 12-14 per cent,
by weight, NaOH and the constant volume of NaCl salt.
The cell liquor is subsequently evaporated in a three or four ‘effect’ evaporation method
to a final nominal concentration of 50 per cent NaOH by weight.
The surplus salt is precipitated and filtered through the evaporation method for subsequent reuse/recycle.
This method produces the lowest quality electrochemical NaOH solutions.
The quality considerations with respect to the diaphragm cell produced Caustic solutions include comparatively high salt,
chlorates, carbonates, and sulfates. Salt, as NaCl, concentrations are
typically 1.0 per cent, with maximums ranging from 1.1 to 1.3 weight per cent, counting on producer.
The diaphragm cell created Caustic Soda (NaOH) is usually referred as Diaphragm Cell Grade. It is conjointly known as Commercial Grade, Technical Grade, and occasionally Technical Diaphragm or other similar combinations.
An additional ‘grade’ of Caustic Soda (NaOH) produced by the diaphragm cell method is the sublimate grade.
The production of sublimate Grade involves the further evaporation of the 50 per cent Diaphragm Grade NaOH solution to cut back the salt concentration.
The higher concentration solution is then re-diluted to the 50% concentration that is commercially available as sublimate grade Caustic Soda.
Common uses include process and sewer water neutralization,
textiles production, soaps and detergents and aluminum production.
These uses and applications typically can confer with the Caustic Soda as any of the varied grades.
Membrane Cell
This method produces approximately 13 per cent of Sodium Hydroxide.
The membrane cell method utilizes a selective membrane that separates
the Chlorine and Sodium ions. The membrane permits the Sodium ion to migrate across the membrane
whereas keeping the Chlorine gas and salt (brine) solution in a compartment on the opposite facet of the membrane.
The Sodium ion is reacted with refined water as within the mercury cell to provide the Caustic Soda (NaOH).
Evaporation is employed, as within the diaphragm method,
to lift the concentration up to the nominal 50 weight per cent solution.
The salt concentrations are not targeted as considerably during this
evaporation method attributable to the selective diffusion nature of
the membranes as well as the reduced quantity of evaporation needed
during this method opposed to the diaphragm evaporation.
The Caustic Soda produced by the membrane cell process is most typically brought up
as Membrane Grade. It conjointly contains a growing acceptance as
a Rayon Grade product in all areas outside of rayon fiber production.
Hope this article would be helpful.
Arax chemi Co. is a great producer of caustic soda flakes, and we are here to do service for you including export caustic soda flakes to your country or any other place you have inquiry.
Contact us for further details
office: +98-21-36442712 to 18
Export unit :
09129301051
09129301052
نوشته Sodium hydroxide details اولین بار در . پدیدار شد.
from http://bit.ly/2PmYPtF
via IFTTT
Comments
Post a Comment